3D self-adhesive wall stickers manufacturers below introduce some knowledge of 3D wall stickers

3d self adhesive wall stickers factory: 3d wall stickers with formaldehyde?

In daily life, 3d wall stickers are very important for home decoration, because 3d wall stickers can not only decorate our room, but also enhance the beauty of interior decoration. So, is there formaldehyde on the 3d wall? How to buy 3d wall stickers? Let's explore the answer together.

3d self adhesive wall stickers factory: 3d wall with formaldehyde?

Yes, because the 3d wall stickers contain glue, there must be some formaldehyde, but as long as the content of formaldehyde is within the range we can tolerate, it will not have a great impact on our health. In addition, ventilation and green planting can effectively reduce The content of formaldehyde.

3d self adhesive wall stickers manufacturers: how to buy 3d wall stickers?

1. Texture

Generally good quality 3d wall stickers have the effect of uniform color, and there will not be too many messy colors. When you touch the 3d wall stickers with your hands, you will feel that it is particularly smooth, but if it feels particularly rough, it means that its quality is not enough.

2. Smell the smell

If poor quality glue is used in the production process of 3d wall stickers, the formaldehyde content of this glue will be more, so there will be a pungent smell, but good quality 3d wall stickers are generally tasteless.

3. Look at the color

The color of the high-quality 3D wall stickers is very pure, and the prints are also very clear. However, the poor-quality wall stickers are not only blurred in color, but the prints on them are also ugly. Therefore, when you buy 3D wall stickers, you can see them Color.

3D self-adhesive wall stickers manufacturers: How to tear off 3D wall stickers

1. First, use a hair dryer to properly heat the wall, and then try to tear off a corner of the wall sticker. If it is found that there is no degumming on the back of the wall sticker, you can slowly tear it off. Of course, the temperature cannot be heated too high or continuously heated, and it is easy to degumming or even wall paint. fall off.

2. If it is PVC wallpaper, it can be torn off according to the above method, and a small amount of glue can be scrubbed clean. If it is pure paper wallpaper and non-woven wallpaper, it is not recommended to remove the wall stickers. There is no effective method at present.

3. It can also be torn off directly by hand. If there are residual traces, it can be removed with alcohol, detergent, gasoline, etc.

3D wall stickers contain a certain amount of formaldehyde. The method of tearing off 3D wall stickers is the same as above. I hope it will be helpful to everyone.

The small editor of the 3D self-adhesive wall sticker manufacturer will not introduce much today. Thank you for watching. Through the above introduction, we all know some knowledge about the 3D self-adhesive sticker. If you need this sticker, you can contact our manufacturer or customize it according to your requirements.