What are the advantages and disadvantages of wall stickers?

Many families like to use it when decorating, renovating or renovating walls or renting out houses3DWall stickers. Since the three-dimensional wall sticker itself has a certain thickness, it is not as rough as wallpaper and wallpaper. Even when it is not visible, the wall can be directly pasted (uneven walls may have some effect on the bonding). If the wall is paved, it will bring a very beautiful effect. What are the advantages and disadvantages of wall stickers? Let us find out.

1The advantages of wall stickers

1At present, the wall stickers on the market are rich in color and have a strong role in local decoration. Owners can choose different wall stickers according to the style of house decoration, including simple, clear, elegant and other different styles, or they can choose according to their own preferences.

2The construction of wall stickers is relatively simple, and the decoration is relatively easy. Compared with traditional wallpaper, wall stickers are a new type of decorative material. A wall decorated with wall stickers is not only better than wallpaper, but also easier to build. Secondly, the wallpaper is easy to fall off or moldy after a long time, and the wall stickers are not only visually strong, but also not easy to fall off.

3.The wall stickers are also easy to scrub. They are especially suitable for families with children. It is natural for children to doodle. If children scribble on the wall, it's hard to remove them. If you use the wall, you don't have to worry about this problem, just scrub it with a damp cloth.

2Disadvantages of wall stickers

1.Some of the wall stickers are genuine leather. Due to the material, they will produce some peculiar smell, which will cause great harm to the human body in severe cases. Secondly, leather wall stickers have fewer patterns and are not easy to replace frequently.

2.It is very troublesome to remove the wall sticker because it is glued on, and the glue used is very sticky. Demolition is not easy. If the operation is improper, the wall will leave traces after demolition, which will seriously affect the overall beauty of the house. In addition, the service life of wall stickers is relatively short.

The use of wall sticker products in a large area will greatly increase the potential fire hazard. If this wall sticker does not have good flame retardancy, once it comes into contact with an open flame, it will catch fire, just like opening the throttle. Tear off the adhesive backing on the cut strip wallpaper sample, move it to the alcohol lamp flame to ignite, and then leave the flame to observe whether the wallpaper sample can continue to burn, or whether the flame can automatically extinguish in a short time. The adhesion of a wall sticker sample stuck to the surface of a clean stainless steel plate under constant tension is measured by the peeling time required to completely tear it off. The pasting area of each wall sticker sample is the same as that of the stainless steel surface (8cm×8cm), the movable end of the test piece is fixed with a clamp, and the rear end of the clamp is connected with the suspension weight. Using the weight of the weight as a constant tension, the pasted wall sticker coupon was peeled from the stainless steel surface, and the peeling time required for each sample coupon was recorded. Although the promotion of three-dimensional wall stickers is also in actual use, the flatness of the wall to be bonded is also the main factor affecting the final bonding effect. Before pasting, the wall should be cleaned. The smooth and flat wall surface can enhance the adhesion with the wall sticker and extend the use time.