3D self-adhesive wall stickers manufacturers below introduce how to paste 3d stickers

In our family life, we all dream of a warm family environment. Many times, you can't get what you want, because the newly decorated house, if used improperly, can easily stain the walls and affect the beauty of the house. Therefore, we very much hope that there is a product that can protect the walls of our home and make the home environment as beautiful as ever.

In order to meet people's needs, I have recommend several 3D stickers for you today, which can protect the walls of the home to a certain extent. In addition, 3D stickers can also make the renovation of old walls have a good effect. Interested friends can consider it.

how to stick 3d stickers?

Material: scissors, knife, card, bank card

1. Use scissors to cut off the extra blank parts around the figure, so that it is easier to stick firmly.

2. Stick the transfer on the graphic, and then use the card or British Airways card to scrape back and forth several times, so that the graphic can be perfectly attached to the transfer film without bubbles.

3. Gently tear off the graphic transfer on the graphic base paper. If the graphic is not stuck on the transfer sheet, you can use a knife to assist. When pasting large-area graphics, you can reverse the graphic and tear off the graphic base paper from the transfer sheet and the graphic.

4. Select a corner wall from the leftover materials cut off from the transfer to test the wall performance, and then paste it after confirming that there is no problem. If the powder falls off the wall or the transfer is torn off and stuck with the wall paint, please dispose of it before pasting.

5. When drawing, first stick the corner of the transfer on the wall, then slowly stick the transfer with the graphic downward on the wall, and then draw several times from the middle of the graphic to the surrounding direction repeatedly with the card to make the sticker firmly stick on the wall.

6. When tearing off the transfer from the wall, the action is light and slow. According to the graphics, do not tear off the graphics together when tearing off the transfer.

3D self-adhesive wall stickers manufacturers: 3d stickers can be used for many years

3D sticker three-dimensional sticker, also called three-dimensional wall hanging and relief sticker, refers to the three-dimensional sticker that people like. At the same time, it strengthens the development and matching with the sticker. The three-dimensional sticker has a certain hardness and flexibility, and has heat preservation, flame retardant, waterproof, and anti-corrosion, No deformation, aging resistance, etc., the service life is more than 20 years, the color is diverse, the surface is smooth, easy to install, the main difference of ordinary stickers have three-dimensional effect.

The small editor of the 3D self-adhesive wall sticker manufacturer has been introduced here today. Thank you for watching. I hope it will be helpful to you through the above introduction. In addition, if you need 3D stickers, you can contact our manufacturer.