3D self-adhesive wall stickers manufacturers talk about how to stick 3D wall stickers on the wall

3d self adhesive wall stickers factory: how 3d wall stickers on the wall?

3D wall stickers, also known as 3D wall hanging and embossed wall stickers, refer to the three-dimensional wall stickers that people like, and at the same time strengthen the development and collocation with wall stickers. 3D wall stickers are generally made of relief boards, with good visual effects, fashion and light, and are firm after being pasted. So how do we stick this wall sticker on the wall and what problems should we pay attention?

Gently tear off the bottom paper of the pattern pasted on the 3D wall with the pattern. If the pattern is not stuck on the transfer film, you can use a knife to assist. When pasting a large area of pattern, you can reverse the pattern, tear off the bottom paper of the pattern from the transfer film and the pattern, transfer the scraps cut by the film, select a corner wall to test the wall performance, and paste it after confirming that there is no problem, if the powder falls off the wall or the transfer film is torn off and adheres to the wall paint, please dispose of it before pasting.

3D self-adhesive wall stickers manufacturer: the specific operation process is as follows

1. Please prepare some tools before posting: scissors, knives, cards or bank cards. First, use scissors to cut off the excess blank parts around the pattern, which is easier to paste; stick the transfer film on the pattern, and use the card or bank card Scrape back and forth several times to make the pattern and transfer film stick together better, and there will be no bubbles on the wall.

2. When pasting, first stick one corner of the transfer film on the wall, then slowly stick the transfer film with the pattern down on the wall, and then repeatedly draw the card from the middle of the pattern to the surrounding direction several times to make the wall stick firmly on the wall. When you tear off the transfer film from the wall, you should move gently and slowly. When you tear the transfer film according to the pattern, do not tear off the pattern together.

3. Gently tear off the pattern transfer film from the pattern base paper. If there is a pattern on the transfer film that is not sticky, you can use a knife to assist. When pasting a larger pattern, you can reverse the pattern and remove the pattern base paper from the transfer film. Tear off the pattern.

Note: Before continuing, select the scrap cut off from the transfer film, test the performance of the wall surface at the corner, and paste it after confirming that the wall surface is no problem. If the powder on the wall surface falls off or sticks with the wall paint when the transfer film is torn off, the wall surface needs to be treated. For example, the water stain on the surface of the ceramic tile wall surface needs to be cleaned. If the paint falls off when painting the wall surface, you can be brushed, you can be brushed first and the wall surface.

Generally, if there is stolen goods on the wall after pasting, it can be cleaned after pasting with cloth, water or detergent. Generally, the 3D wall will not crack or stick firmly after pasting. Unless the wall is damaged, strong glue can be used to make up glue when necessary.

The small editor of the 3D self-adhesive wall sticker manufacturer will not introduce much. Thank you for watching. If you need 3D self-adhesive sticker or 3D wallpaper, you can contact us. Our manufacturer can also customize it for you according to your requirements.