PVC Embossed FilmBackground technology:
The main component of PVC embossing film is polyvinyl chloride, and some other components can be added to enhance its heat resistance, toughness and ductility. The uppermost layer of this surface film is paint, the main component of the middle layer is polyvinyl chloride, and the lowermost layer is coated with adhesive. It is a synthetic material that is popular, popular and widely used in today's world. The world's use of PVC embossed film in a variety of synthetic materials ranked second. Polyvinyl chloride is the most suitable material for the production of 3D surface films.

The previous traditionalPVC Embossed FilmThe equipment needs to heat and cool the heating roller and the cooling roller respectively, so its energy consumption is very high, and the heating quality is difficult to control due to the performance of one-time heating.
PVC embossing film device, which mainly includes a bottom plate, a hot oil tank, a cold oil tank, a heat conduction roller, a preheating roller, a heating roller, an embossing wheel, a pigment box, a nozzle and a cooling roller,PVC Embossed FilmThe upper left side of the bottom plate is fixedly arranged, and there is a pair of first mounting plates arranged back and forth; the first mounting plate is provided with a pair of heat transfer rollers rotatably connected with the first mounting plate; the upper and lower sides of the pair of heat transfer rollers are respectively provided with The preheating roller rotatably connected to the first mounting plate; one side of the hot oil tank at the lower part of the bottom plate is provided with a cold oil tank, the hot oil tank is equipped with a condenser, and the cold oil tank is equipped with an evaporator. The inlet and outlet of the condenser and the evaporator are respectively fixedly connected through refrigerant pipes, and a compression pump and an expansion valve are respectively installed on the refrigerant pipes. The upper side wall of the hot oil tank is fixedly connected with two first three-way pipes, and the other two branch pipes of the first three-way pipe are dynamically sealed and connected with both ends of the preheating roller.