In order to facilitate wall decoration and save costs, many young people struggling in the city like to buy embossing film. Embossment film is cheaper, but the construction method is more complicated. Moreover, the self-adhesive embossing film is relatively thin, and it is easy to break or wrinkle during construction, which makes many customers have a headache. so how to stick embossed film?

If the customer watched the construction video of the embossing film online before buying, these problems will be relatively easy to deal. If you follow the method in the video step by step, there will be no problem.

The construction method of embossed film is as follows:

The walls need to be clean and tidy. -- No peeling and no dust.

Embossed film must first ensure the smoothness of the wall. If the wall is uneven, you can't stick wallpaper. If uneven, you need to buy sandpaper in the paint shop to polish the wall.

After the preliminary work is done, it is necessary to study the paste method, which is the key to the embossed film. Generally speaking, it is recommended that we choose the top-down paste method. Of course, if the customer insists on bottom-up paste, it will not affect. But if this paste, not only the paste process will have traces, the difficulty will be greatly improved. If it is not a professional technician, it is difficult to handle it properly.

Since we are not professional embossed film construction personnel, even if we master the methods and skills, it will inevitably show negligence. Regarding this phenomenon, if there are bubbles or large bubbles, you can choose to puncture directly with a needle, and then gradually squeeze out the air inside. If the bubble is relatively small, it can be gradually squeezed from the edge to the center.

There are some redecoration owners in the second decoration often tear off the previous embossed film, so how to tear off the embossed film? How to tear off the embossed film manufacturers believe that there are several ways to deal with the old how to tear off the embossed film, the specific choice of which method depends on how to tear off the embossed film material and wall type.

(1) How to tear off the embossed film. Materials that need to be prepared: wallpaper knife, hole punch, wallpaper remover (if you can't find this, you can use soap), cover sheet, sprayer or spray bottle.

(2) How to remove the embossed film:

1. Cover the floor with cover sheet;

2. If your embossed film liquid needs to be stirred, use a sprayer to stir the liquid with hot water;

3. Use a punching machine to punch holes on the surface of the wallpaper to ensure that the wallpaper remover penetrates into the wallpaper and reduce the viscosity of the adhesive.

Spray wallpaper remover and let it penetrate the wallpaper. (Note: This process should not be rushed. Let the wallpaper remover do most of the removal.)

4. Once the wallpaper is loose, peel it off with a wallpaper knife. Be careful not to chisel the wall. Remember to remove the liner. Some old embossed film may stick to the dead wall. In this case, it is necessary to re-infiltrate the wallpaper with a wallpaper remover to reduce the viscosity of the adhesive again;

5. Spray embossed film remover on any place where there is glue residue on the wall, wet the wall with a sponge with hot water, and wipe the wall from top to bottom to ensure that all the glue on the wall is removed;

6. Let the wall dry in the shade, use a vacuum cleaner to suck off the dust on the wall, and you can redecorate!