Embossed film is a combination of science and technology and life. It can be said that life is integrated with high technology. Then, let's learn how to maintain the embossed film!

Embossed film has painted wallpaper and pressed wallpaper. Embossed film is based on wood pulp base paper, coated with vinyl chloride-vinyl acetate copolymer emulsion and titanium white, clay, pigments, additives and other latex coatings after drying and printing. Embossed film by PVC resin and plasticizers, stabilizers, pigments, fillers by mixing, calendering into a film, and paper-based hot-pressing composite, printing and embossing. They all have the characteristics of scrub resistance and good ventilation.

Advantages of embossed film

1. Good decorative effect

2, excellent performance: flat performance, fitting performance, anti-fouling, easy dust, light resistance, sound absorption.

3, paste construction is convenient

4. Long life and easy maintenance

Disadvantages of embossed film

The embossed film will have the moisture of the glue and the substance in the pigment, which is not suitable for the bedroom. Embossed film are soft PVC plastic products, containing a large number of plastic plasticizers (generally 20% to 30%). Most of these liquid additives such as soybean oil are harmful to the human body. In order to improve the processing and use performance of plastics, a small amount of stabilizers, anti-aging agents, and fungicides are also added to plastic floor leather and embossed film. These additives are more toxic and sometimes carcinogenic. The bedroom is generally closed and the room is small. Even if the embossed film is used to decorate the bedroom, these plastic additives will also affect the fresh air in the small space of the bedroom, which will cause adverse effects on human health for a long time.

Maintenance of Embossage Film

Embossed film blistering:

Blistering of embossed film is a common problem. The main reason is that the coating is uneven when the embossed film is pasted, which causes the surface of the embossed film to shrink in the later stage, and the water separation base is too far away, resulting in built-in bubbles. In fact, the solution is very simple. Use an ordinary sewing machine to needle the bubbles on the surface of the embossed film, release gas, use a needle to draw out an appropriate amount of adhesive and inject it into the pinhole just now, and push the embossed film to dry.

moldy embossed film:

Embossed film mildew is generally the rainy season and wet weather, mainly the wall moisture is too high. For mildew is not very serious wallpaper, the solution is to use a white towel dipped in the right amount of water to wipe, otherwise wipe with soapy water.

Embossed film warping:

Embossed film edge warping may be the grass-roots treatment is not clean, the glue adhesion is too low, or the edge of the corner wallpaper is less than 2mm and other reasons. The solution is to stick the rubber powder with embossed film on the curl part, stretch the foam, blow it with a hair dryer for about 10 seconds, press it firmly with your hands, and dry it with a hair dryer.

Embossed film scrubbing: Do not use colored raw materials to contaminate the wallpaper with a wet or dry cloth to wipe the stained area. If not, it will be difficult to remove. When wiping the embossed film, please start from the avoided corner or the hidden place behind the door to avoid adverse reactions and cause damage to the embossed film.