ViewFloor stickersWhether the color is consistent: If the color difference is too large, it will directly affect the appearance and can be changed; if the color is too consistent, there is almost no color difference, which depends on whether the pattern of the floor sticker surface is the same. Generally speaking, the surface patterns of solid wood flooring and laminate flooring should be different, while the patterns of laminate flooring should be the same and similar.

See if there is any sound on the floor; during the acceptance period, walk back and forth on the floor and pay attention to the sound of footsteps. Please pay more attention to the acceptance of walls and doorways. If you find a place with a sound, you should repeat the walk to determine the specific location of the sound, and then mark it with chalk. In this case, you can request removal and resurfacing.
CheckFloor stickersDeformation or warping: This requires the use of tools. The method of acceptance is to use a 2-meter-long ruler, leaning on the floor, and the flatness should not be greater than 3mm. Remember to measure a few more places. If the pass rate exceeds 80%, it is considered qualified.

In addition, you can touch the corner of the floor sticker and the floor to see if it is flat.
Check whether the doorway strip is stable: Basically, the wooden floor of the home will be installed door fasteners. Generally speaking, they should be installed directly under the door. It is preferable not to leave any edges on the inside and outside after closing the door.
In addition, the gap between the buckle and the bottom of the door should be between 3mm and 7mm so that the door can be opened and closed freely.
Check whether there is a large gap between the floor sticker and the floor sticker. If the gap is large, the floor will easily loosen later.
The last thing is to look at the scratches.Self-adhesive wall stickers manufacturersAfter installing the floor, it should be handed over to the homeowner. Moreover, each floor sticker has a certain wear index, no sharp tools and brute force, generally will not leave obvious scratches.