Self-adhesive wallpaperIs now on the market is very popular a wallpaper, because with environmentally friendly glue, so get everyone's favorite. Then let's take a look at the requirements for the wall surface when pasting.
1. In the process of construction, if we encounter switches or sockets, we need to cover the wallpaper first, then use smooth wooden handles and art knives to draw diagonal crosses, use scrapers at the edge of the switches, and use art knives to cut additional parts. However, what we should pay attention to is that when dealing with the printing of connected wallpapers, if it is found that the junction of the two wallpapers has the same pattern position, which is about 12cm wide, then after aligning all the wallpapers, use the scraper to resist and then use the superimposed part. The blade can cut.

2. We are rightSelf-adhesive wallpaperBefore construction, the wall also needs to be treated. This kind of treatment we can use the method of frosting to straighten the wall, or use some objects, such as gypsum powder, so that the wall is flat. Secondly, you can remove the original paint on the wall or other objects. If there is a crack in the wall, we can fill it in the way just described. If the wall is sandy gray, this one should be separated, covered with glass wool, and used in poor quality partitions or exterior walls. This one should be plastered with gypsum board. Only the wall is clean, flat, smooth and strong to adhere to the wallpaper.
The above is about to introduce to youSelf-adhesive wallpaperDuring the construction, we must pay more attention to the requirements of the wall surface during the operation.