Lots of family choices.Self-adhesive floor stickersAs a floor decoration, because there are many styles of floor leather, the construction and paving are very simple and convenient, and only need to be pasted to achieve satisfactory results.
How long does a self-adhesive floor sticker last? It depends on the material of the self-adhesive floor sticker itself. If it is a regular product, this self-adhesive floor sticker is more wear-resistant than ordinary floor tiles, because a special high-tech wear-resistant layer is added to its surface, so the service life is relatively long, reaching 10-15 years. If properly maintained, its service life will be longer. However, some self-adhesive floor tiles are of poor quality. If they are directly exposed to the sun, they may begin to age in 3-4 years.

self adhesive floor stickers, what are the advantages?
Decorative. Today's self-adhesive floor stickers are very rich in patterns and colors, and we can match them most appropriately according to the environment to create a comfortable and comfortable home space. Comfortable and anti-fatigue self-adhesive floor stickers feel soft and elastic, which can make the body and mind more relaxed and comfortable, reduce fatigue, and do not have to worry about the tremor caused by hard floors such as tiles and soles.
Safety non-slip floor leather has high safety performance and good anti-slip performance. There is no need to worry about slipping, which greatly reduces accidents caused by falls and injuries. It is especially suitable for the elderly and children and can play a role in safety protection. Now when people are laying wallpaper, most people will choose to use sticker wallpaper and sticker wallpaper. Since its introduction, it has been very popular and loved by people. However, people still need to know and know how to stick adhesive wallpaper, so that the correct bedding will have a good effect. In addition, wallpaper should also pay more attention.
Fill the cavities in the wall with putty and scrape the wall flat with a spatula. Measure the size of the wall, and then measure the wallpaper according to the area of the wall. Pay attention to the length of the wallpaper, 5Cm more than the actual veneer. Secondly, mix the powdered wallpaper glue with water to mix the general wallpaper with 1:3 and the foamed wallpaper with 1:2, or paste it with the wallpaper special glue that does not need to be mixed, and dip the mixed wallpaper special glue with a roller brush, Brush evenly on the back of the wallpaper. Then stick the wallpaper on the wall and brush it with a wooden handle from top to bottom and from the four corners to the inside, so that the wallpaper can be smooth. When encountering a power switch or socket, cover the wallpaper first, then brush it flat with a wooden handle, then draw a cross at the corner of the upper face with a utility knife, press the edge of the switch with a scraper, and then cut off the excess part with a utility knife. If there is a connection between the printed wallpapers, find the consistent position of the pattern at the connection of the two wallpapers, overlap and paste, the width is about 12cm. After all the wallpaper is aligned, use a spatula to counter it, and then use a blade to cut off the overlapping parts.
Pay attention to the wallpaper from top to bottom. If the laitance is found to be uneven, you can wet it with a towel and then smooth it again with a scraper. Post-process the wallpaper around the doors and windows in the same way as the wallpaper at the power switch. After pasting the wallpaper, put it back to the original equipment. Want to know morePVC embossed film, PVC sports flooringThe content, can pay attention to us.