Many houses now belong to the old houses, and the old houses have been living for a long time, and many items in the houses will be fatigued. Therefore, most people now have the idea of redecorating. Of course, renovating houses is not difficult. There are also some very simple methods, such as the wall, using good wallpaper is enough, then the problem arises,Self-adhesive wallpaperHow to post?Self-adhesive wallpaper manufacturersto share with you.

Scrape the old paint on the original wall first. If it is old wallpaper, it must be torn off first, and then cleaned with a scraper. Measure the size of the wall and the size of the paper. If it is color wallpaper, put the color in order every time. Finally willSelf-adhesive wallpaper manufacturersAfter the wallpaper is cut, apply the special glue for wallpaper, apply the glue evenly with a roller or brush, and then apply the glue to the wall.

1. First of all, before pasting wallpaper, be sure to clean the wall to avoid dust affecting the pasting effect. If the wall is uneven, be sure to make up for it and prepare the corresponding tools.

2. After cleaning, measure the height to be pasted with a ruler, and then cut it. When cutting, leave an extra 5cm on each side to facilitate post-processing.Self-adhesive wallpaper manufacturersThere are patterns on the wallpaper, so pay attention to be beautiful when cutting.

3. Self-adhesive wallpaper also needs to be cut. After cutting, pour the basement membrane into a bucket, mix with clear water, and then evenly coat it on the wall.

4. When pasting self-adhesive wallpaper, first start from one side of the wall and stick it in one direction. Use a scraper to scrape laterally from one side to the other to remove gas. Otherwise easy to appear bubbles. Cut off the excess wallpaper.

5. The last step is to cut around after pasting. Pay attention to the cutting of doors, windows and switches.Self-adhesive wallpaper manufacturersDo you remember all the popular science?