1. first check the quality of the wall
In the pasteSelf-adhesive wallpaperBefore that, we need to clean the wall first to keep it clean and smooth. In addition, the water absorption and pH of the wall should be appropriate. If the wall surface has been painted before, it must wait until it is completely dry before operation.
2. do a good job of ground protection
Do a good job of protecting the ground when paving, keep the ground clean and tidy, for example: you can spread a layer of newspaper on the ground, which can not only prevent the glue from soiling the ground, but also play a good role in protecting the ground.
3. measurement dimensions
When paving wallpaper, be sure to use tools to measure the wall to be pasted, and then see how much wallpaper needs to be used.

4. Cut Wallpaper
in clippingSelf-adhesive wallpaperAt the same time, it is suggested that the length of each piece is larger than the length of the wall surface, and an extra ten centimeters can be reserved. If there is any surplus after pasting, it can be used for later repair, which can also save the dosage.
5. wallpaper paving
When pasting wallpaper, you need to use some auxiliary tools, so that the effect of paving will be more beautiful. Pay attention to the time when pasting. If the time is too long, the edge of the wallpaper will dry, which will make it difficult to correct.
The above is about how to post it yourself.Self-adhesive wallpaperIf you want to know, you can pay attention to this website, and there will be more wonderful content in the later period.