Self-adhesive wallpaper is a very popular wallpaper now. It is economical and practical. You can DIY your favorite patterns. The important thing is that the environmental protection is very good. Then, let's learn about self-adhesive wallpaper and how to post it!

General self-adhesive wallpaper needs sizing, environmental protection is not as good as wallpaper. Because the glue contains harmful substances. In addition, self-adhesive wallpaper needs to employ workers. In addition, self-adhesive wallpaper itself is more expensive than self-adhesive wallpaper. It can be directly pasted for decoration and is easy to use. The surface of this wallpaper can be scrubbed, and the back has glue (without additional glue). It is as easy to paste as a tack. Self-adhesive wallpaper is rich in color, rich in patterns, safe and environmentally friendly, convenient in construction. Wallpaper has certain sound absorption, heat insulation, mildew and antibacterial functions. Anti-aging, anti-insect, no poison, no pollution, the surface is easy to become clean, thus becoming the development trend and trend of home improvement.

If you don't know, the trouble is not necessarily effective. It is used for decoration of home walls/furniture/shops. It is beautiful, fashionable and easy to paste, which makes the room look brand-new in an instant. You can also paste self-adhesive wallpaper on the outside of a beautiful shoe box, and immediately use a small amount of money to DIY the same effect as a beautiful and expensive carton like IKEA! The storage box can be placed directly at home, not only the style is elegant, the color and pattern are different, and the storage box of different sizes can meet various needs!

paste self adhesive wallpaper method:

1. Punching holes on the wall, filling with putty and leveling with a scraper.

2. Measure the wall size and measure the wallpaper based on the wall area. Pay attention to the length of the wallpaper. 5cm more up and down than the actual sticker.

3. Next, mix the powdery wallpaper glue at 1:3, mix the foamed wallpaper at 1:2, or paste it with special glue without wallpaper, and dip the mixed wallpaper special glue with a roller brush to evenly coat the back of the wallpaper.

4. Secondly, lean the wallpaper against the wall, brush it from top to bottom with a wooden handle, and stick it inward from the corner to make the wallpaper flat.

5. When encountering the power switch or socket, first cover the wallpaper and polish it with a wooden handle, then draw a cross on it with a knife, press the knife against the edge of the switch, and cut off the excess part with great force.

6. When the printed wallpaper is connected, find out the place where the pattern is the same at the connection of the two wallpapers, and overlap and paste it about 12cm wide. After the wallpapers are all neat, press it with a scraper, and cut off the overlapping part with a blade.

7. When pasting wallpaper, please paste it from top to bottom. If there is floating paste uneven, please wet with a towel, with a scraper to re-level.

8. Handle wallpaper around doors and windows. The method is the same as the power switch wallpaper processing method.

9. After pasting the wallpaper, put it back into the original device to complete.

(I) corner wallpaper notice

1. Use a rubber scraper to paste wallpaper and cross the convex corner. Please don't stick it on the other side of the wall.

2. Crease the corner of the convex wall from top to bottom by hand, and draw a vertical line from ceiling to floor at a distance of 2 .5cm from the convex wall.

3. Cut the wallpaper along the above vertical line with a art knife and guide it with a ruler.

4. Carefully pull down the extra wallpaper and put it on the workbench to take away.

5. Use a seaming machine to flatten the outward extending part of the wallpaper, and stick the wallpaper with a cover and stick the adhesive.

6, mounted wallpaper, jigsaw puzzle, with a rubber scraper scraping wallpaper, with roller flattening.

(II) Yin Angle Sticker Wallpaper

1. Treatment of the negative angle of the house without settlement

1. Measure from the center of a wallpaper to the concave corner, add 2.5cm, and cut the wallpaper according to this width.

2. Paste the above wallpaper, merge and connect the pasted wallpaper, and level it at the concave corner.

3. Use the rubber scraper to scrape up and down and stick the part extending outward to the wall, and wipe the adhesive of the rubber scraper to make money.

4. Measure the width of this section from the concave angle outward, add 5mm, and mark it on the wall.

5. Put the level on the pencil mark, check whether it is really vertical, and apply glue on the wallpaper pasted on the covering.

6. Align the outside of the wallpaper with the cover with the vertical line, and mount the remaining wallpaper in the room based on the vertical line.

Treatment Method of Settlement Yin Angle of (III) House

1. Measure from the center of a wallpaper to the concave corner, add 2.5cm, and cut the wallpaper according to this width.

2. Paste the above wallpaper, merge and connect the pasted wallpaper, and level it at the concave corner.

3. Use the rubber scraper to scrape up and down and stick the part extending outward to the wall, and wipe the adhesive of the rubber scraper to make money.

4. Overlay and paste another wallpaper with the front wallpaper, aiming at the flower wallpaper and the opposite wall.

5. Use the female angle to flatten the female angle on the back of the scraper. Note: First, slowly stick the wallpaper to the female angle by hand, and then slowly flatten the female angle on the back of the scraper to avoid damaging the wallpaper.

6. At a distance of 2mm from the female angle, use a scraping knife to trim the crease along the edge. Use a ruler to aim at the art knife and cut from top to bottom.

7. Clean up the excess wallpaper and wipe the excess glue with a white towel or sponge.